Time required: about 5-10 minutes
Level of difficulty: Easy
Tools needed: Flat head screwdriver, 10mm(?) socket and wrench
I am not responsible for any damage caused by these instructions. Proceed at your own risk. I do my best to make sure they are accurate. Always wear the proper safety gear and use common sense.

1. Remove the pivoting screw with the screwdriver and the wrench.

2. Rotate lever out.

3. Once its out far enough you can just pull it up off the clutch cable.

4. Installation is opposite of removal. Thats it! I'm not even sure why I bothered with a guide its so easy, but as long as it helps ONE person...

This tutorial has helped people since May 4th 2004.